festool connectors represents a topic that has garnered significant attention and interest. festool ETS 125 EQ - JLC-Online Forums. I know alot of people don't feel the need for the 150/5 as it duplicates the specs of the RO150 in RO mode but it is so much nicer to use. The one I could skip completely is the 150/3. Bob Kovacs Moderator Join Date:Jun 2004 Location: Holly Springs, GA Posts:3286 #9 02-16-2011, 04:50 AM Re: festool ETS 125 EQ Originally posted by Brice Burrell ...
Templates/Jigs for shelving holes, Festool? Additionally, i have the Festool system (LR32) and think it works great. However, I didn't buy the whole kit.
The whole kit comes with two 5mm bits and a 35mm bit. I have zero need for any of them since I use 1/4" bits for my shelf holes and do my 35mm holes on a drill press. Festool HL 850 E Planer - JLC-Online Forums. When I went out on my own, I tried the festool, and for dust collection, it is tops.
But for straight out performance on door work, I felt it was worth it to watch ebay for a good pc 126. Gary did an article for JLC that compares the PC, the Festool, and the Bosch planer, in regards to door work. It's worth reading if you can find it. Festool Parallel Guide Fence - JLC-Online Forums. That is why I bough the longer Festool track locally at the one place in the state that carries Festool, (most of the time - if it is in stock).
:) Γ’β¬ΕRacism is man's gravest threat to man - the maximum of hatred for a minimum of reason.Γ’β¬ Abraham J. Heschel (Jewish theologian and philosopher, 1907-1972) Brice Burrell Veteran Contributor Fein / Festool - JLC-Online Forums.
The Festool is fine if all it does is stay attached to a tool but I prefer an all around vac for the jobsite rather than having to carry two vacuums with me. I'm leaning to that as well, I love the Fein so much why switch. Now that I know the Festool products will attach - I think that seals the deal. I recently decided to use several of the festool boxes to store tools etc.
thought you might like to see before it gets all f up and and we have to start looking for AL again !!! Moreover, festool saw for wood flooring - JLC-Online Forums. The festool will get within about 3/8" of an inch to a wall due to it's flat side. No blade likes flooring nails or staples, so allow some $ for extra blades when you finish, and wear eye or even full face protection. Coping Foot w/Festool Jigsaw?
In this context, the coping foot needs a slight modification for the Festool saw. If you're buying one new, let David know and he'll cut the groove, otherwise you'll have to cut a small notch for the blade.
π Summary
To sum up, we've examined key elements about festool connectors. This overview presents important information that can assist you in gain clarity on the subject.
We trust that this information has provided you with helpful information on festool connectors.